01
Open the Clip
Hold the razor handle and gently open the locking clip. Spread the two handle arms apart to expose the blade slot.
✦The clip opens with light pressure — no force needed.
02
Take Out a Blade
Remove one blade from the box. Each blade is individually wrapped. Unwrap carefully and hold by the edges only — never touch the cutting edge.
✦Hold the blade by the short non-sharpened sides.
03
Insert Between the Pins
Slide the blade onto the two steel alignment pins inside the razor. The blade should sit flat between the two arms with the cutting edge facing out.
✦You will feel a small click when the blade seats correctly.
04
Lock the Clip
Bring the two handle arms back together and snap the locking clip shut over both sides. Give the razor a gentle shake — the blade should not move at all.
✦If the blade wobbles, reopen and reseat it on the pins.
Blade locked? You should feel zero wobble when you shake the razor. If the blade moves, reopen and reseat it.